The Façade Inspectors use the drone to conduct 100% Visual Inspections. This helps our team save time and allows us to capture images that may be difficult to reach. Hammer tapping conducted by Façade Inspectors to test for damage or any defects of the...
Our team conduct a 10% close-range inspection on the signage for any damage or defect Suction Test is conducted by our rope access team by installing the device and pulling it to do a load test. This ensures that the cladding panel is safe. Our team also helps to...
Using boom lift, our team of Façade Inspectors (FI) can reach higher heights to conduct inspections. Rope Access Team conducting façade inspections on the signage and granite cladding. We also use Borescope to conduct 10% close range inspections when it is too narrow....
10% Close range Inspections: Boom Lift is used to help our Façade Inspectors (FI) reach higher heights and conduct inspections. Metal Detector It is used to detect whether the panel is fixed with metal pin/support. It also helps to pinpoint the position so that we can...
PFI is carried out at these HDB buildings using Gondola. It allows our Façade Inspectors to access the building and allow inspection works to be carried out at height. The boom lift is employed, as can be seen in the picture, to assist our façade inspectors (FI) in...
